How Scrap Metal Is Weighed: Certified Scales and What a Fair Weigh Looks Like

Sheet metal and trays sorted for weighing at the yard
Published 16 November 2026 5 min read 1,002 words

Topic: Grading and Sorting

Scrap metal is weighed grade by grade on scales approved for trade. At a good yard, each metal is sorted first, the weight of any bin, bag or tub is taken off, and you can see the reading on the scale. How is scrap metal weighed fairly? The rate per kilo only matters if the kilos are right, so this guide explains what accurate weighing looks like and what to check.

It covers the rules for trade scales in Australia, gross, tare and net weight, why your load may weigh less than you expected, and how weighing works when you bring metal to our Green Fields yard in Adelaide.

The short answer

  • Scales for trade: scales used to buy and sell by weight in Australia must be suitable for trade and verified.
  • You should see the reading: the display should be visible to you while your metal is weighed.
  • Grade by grade: each metal and grade is weighed separately, not the whole load at once.
  • Tare comes off: the weight of bins, bags and tubs is taken off to give the net weight.
  • Non-metal is not paid for: water, plastic and dirt are deducted or drop the grade.

The rules for trade scales in Australia

Australia’s trade measurement system is run nationally by the National Measurement Institute under the National Measurement Act. Any scale used to work out a price by weight, from a supermarket deli to a scrap yard, has to be of an approved type and verified as accurate, and it is checked again after repairs or adjustments. A scale that is fine for weighing parcels in a warehouse is not automatically fine for buying metal by the kilo.

For you as a seller, that means two simple checks: the yard should be using a proper trade scale, and you should be able to see what it reads.

Sheet metal and trays sorted for grading at the Green Fields yard
Metal is sorted into grades first, then each grade is weighed on its own.

Gross, tare and net weight

  • Gross weight: the metal plus whatever it is in (a bin, bag, tub or pallet).
  • Tare weight: the weight of the container on its own.
  • Net weight: gross minus tare. This is the weight you are paid for.

If your metal arrives in a heavy steel bin or on a pallet, the tare makes a real difference, so it should be weighed or known, not guessed.

Why each grade is weighed separately

Copper, brass, aluminium, cable and steel all have different rates, and so do the grades within each metal. Weighing the whole load together and then estimating how much of it was copper leaves the most important number to guesswork. Sorting first and weighing each grade on its own means every kilo is paid at the right rate. Our guide on how to sort scrap metal before selling shows how to bring it in ready to weigh.

Why your load may weigh less than you expected

  • Bathroom and luggage scales are not trade scales and can be well out.
  • Water: pipe, cable and bags left out in the rain carry water that is not metal.
  • Attachments: plastic, rubber, insulation and steel are not paid at the metal rate.
  • The container: forgetting the weight of the bin or bag makes the load seem heavier than the metal is.

What to check when your metal is weighed

  1. The scale reads zero before your metal goes on.
  2. You can see the display.
  3. Each grade is weighed on its own.
  4. The weight of any bin, bag or pallet is taken off.
  5. The rate for each grade is confirmed before you are paid.
  6. The sale is recorded with the grades and weights, as South Australian law requires.
SA Copper Scraps scrap bin at the Green Fields yard
Bins and tubs are weighed or known so their weight comes off before you are paid.

How weighing works at our Green Fields yard

When you bring metal to SA Copper Scraps at 12 Belfree Dr, Green Fields SA 5107, we sort your load into grades with you, then weigh each grade separately on certified scales in front of you. The weight of any container is taken off, we confirm the rate for each grade, check your photo ID and pay you the same visit. Every sale is recorded. For larger loads on pallets or in cages, ring ahead on 08 7225 9998 so the machinery is ready. See how the whole process works on our scrap metal recycling page, or check today’s scrap metal prices first.

Frequently asked questions

Are scrap yard scales checked?

Scales used to buy and sell by weight in Australia must be approved for trade and verified as accurate under the national trade measurement rules, and they are checked again after repairs or adjustments.

What is tare weight in scrap metal?

Tare weight is the weight of the bin, bag, tub or pallet your metal is in. It is taken off the gross weight to give the net weight of the metal, which is what you are paid for.

Can I watch my scrap metal being weighed?

You should be able to. At our yard each grade is weighed in front of you on a scale you can see.

Why does my scrap weigh less at the yard than at home?

Home scales are not trade scales and can be inaccurate, and the yard takes off the weight of containers, water and non-metal parts. Only the metal itself is paid for.

Do you pay for wet scrap metal?

The metal is paid for, but water is not. Keep pipe and cable dry, and tip water out of pipe before you come, so the weight you are paid on is metal.

Final word

A fair weigh is simple: a trade scale you can see, each grade on its own, containers taken off, and the rate confirmed before you are paid. Sort your load and keep it dry, and the kilos will speak for themselves.

Facebook
Twitter
LinkedIn

Leave a comment

Got a question about a grade or a price? Ask below — your email address is not published.

SA COPPER SCRAPS

Get your free quote

Tell us what you’re selling and we’ll get back to you. Fields marked * are required.

    See our Privacy Policy and Terms.