Aluminium price guide reviewed 3 November 2026

Aluminium Scrap Price Adelaide – Extrusion, Window Frames, Sheet and Cast

Clean aluminium extrusion such as window frames earns around A$2.50–3.50/kg at our Green Fields yard on the guide reviewed 3 November 2026, and domestic aluminium (sheet, pans and light mixed pieces) about A$1.50–2.50/kg. We confirm your rate once each grade is sorted and weighed in front of you at 12 Belfree Dr, with no booking and payment the same visit.

  • Certified scales
  • Paid the same visit
  • Photo ID required
  • No booking needed
Aluminium price per kg

Scrap Aluminium Price Per Kg in Adelaide

Aluminium is light, so the grade matters more than the pile size. Use this table to see which grade your load falls into; the figure on the day is confirmed at the counter after we have looked at it.

Reviewed 3 November 2026 Green Fields, Adelaide Rate confirmed on inspection
GradeWhat it isGuide rate (per kg)
Aluminium window frame and extrusion scrap at the Green Fields yardAluminium extrusionWindow and door frames, shopfront sections, profiles and channels with glass, rubber and steel removedA$2.50–3.50
Aluminium sheet and profile offcuts sorted at SA Copper ScrapsDomestic aluminiumSheet, guttering, ladders, outdoor furniture, pans and light household piecesA$1.50–2.50
Cast aluminiumEngine and gearbox housings, pump bodies and other heavy cast parts, drained and free of steelPriced on inspection
Aluminium cansEmpty drink cans, dry and free of rubbishPriced on inspection
Alloy wheels are separate: mag wheels have their own grade, so see the alloy wheel scrap price. Copper, brass, steel and the rest are listed on our full Adelaide scrap metal price list.
Grading

How Each Aluminium Grade Is Assessed

Extrusion, sheet and cast aluminium are different alloys, and they are melted into different products. That is why we weigh and pay them separately rather than as one pile.

Alloy family

Extrusion is a soft, clean alloy that recyclers want most. Cast parts carry silicon and other additions, and sheet is often painted or coated, so both sit below extrusion.

What is still attached

Glass, rubber seals, steel screws, brackets and plastic thermal breaks are not aluminium. A frame still carrying them is graded down until they come out.

Paint and coatings

Powder-coated and painted aluminium is accepted but grades lower than bare metal, because the coating burns off in the furnace and reduces the yield.

Oil and dirt

Cast engine and gearbox parts should be drained. Oil, grease and mud add weight that is not metal and slow down grading.

Mix-ups with stainless

Some stainless steel is non-magnetic too, but it is about three times heavier. If a piece feels heavy for its size, keep it apart; we pay it at the stainless steel scrap price.

The market

Aluminium rates follow the London Metal Exchange aluminium price and the Australian dollar, so the guide is reviewed at least monthly and sooner when the market moves sharply.

What we take

Aluminium We Accept and Items We Can’t Take

Glaziers, builders, fabricators, boat and caravan owners and households all sell aluminium to us, from a few frames in the boot to a trailer of offcuts.

We accept

  • Window and sliding-door frames from replacement jobs, glass removed
  • Shopfront sections, flyscreen frames and fabrication offcuts
  • Guttering, ladders, outdoor furniture and patio framing
  • Boat fittings, rails, hull sheet and caravan panels
  • Drained engine, gearbox and pump castings
  • Aluminium radiators and copper-aluminium coils, paid on their own grade

We can’t take

  • Frames with the glass still in them
  • Aerosol cans, gas bottles or anything pressurised
  • Cans holding liquid, food waste or rubbish
  • Castings still full of oil or fuel
  • Any load without current photo ID
Preparation

How to Prepare Aluminium for a Better Rate

Take the glass out of window and door frames first, wearing gloves and eye protection. Then pull out what you safely can: rubber seals, steel screws, hinges and brackets. A bare frame moves into the top grade.

Stack or bag extrusion, sheet and cast pieces separately so each is weighed on its own. Drain engine and gearbox parts, and keep cans dry and empty. Our guide to what scrap aluminium is worth explains the grades in more depth, and how to sort scrap before selling covers mixed loads.

Quick checklist

  • Glass removed from every frame
  • Rubber, screws and steel brackets out where practical
  • Extrusion, sheet and cast kept apart
  • Castings drained of oil
  • Heavy non-magnetic pieces checked for stainless
Worked example

How Much Is Aluminium Worth Per Kilo? A Worked Example

Multiply each grade’s weight by its rate and add the results. Because aluminium is so light, a typical window replacement job is worth weighing properly.

ExampleWeightGuide rateGuide value
Bare window frames (extrusion)40 kgA$2.50–3.50/kgA$100–140
Guttering and sheet (domestic)20 kgA$1.50–2.50/kgA$30–50
Worth knowing: the same 40 kg of frames with glass, rubber and screws still in place would be paid at a lower grade, and the glass has to come out before we can take them. Figures use the guide ranges above; your rate is set at the yard.
At the yard

Selling Aluminium at Green Fields

Bring your aluminium to SA Copper Scraps at 12 Belfree Dr, Green Fields SA 5107, between Salisbury Highway and Port Wakefield Road. It suits glaziers and builders working across the northern and western suburbs, and customers drive in from all over Adelaide.

1

Come during opening hours

Weekdays 7:30am to 5:00pm and Saturdays until 2:00pm. Trailer loads are welcome; ring ahead if you are bringing a lot.

2

ID at the counter

Current photo ID is recorded with every sale, as South Australian rules for scrap metal dealers require.

3

Sorted and weighed

Extrusion, sheet and cast are split with you and each goes on the certified scale on its own.

4

Paid the same visit

Once the grades are confirmed we pay you before you drive out.

Regular trade loads are welcome. See how we work with builders and demolition crews and manufacturers and fabricators, or get a price before you drive.
Customer reviews

Reviews From People Who Sell to Us

Google reviews from customers who bring aluminium, copper and other scrap to our yard.

Asadollah BaratGoogle review
★★★★★
Good service and excellent price. Keep going guys.
Samuel MorenaGoogle review
★★★★★
Friendly staff, easy access, great pieces.
Stanley VareliasGoogle review
★★★★★
Great staff and very welcoming, and best prices in the market.
sam haggertyGoogle review
★★★★★
Perfect for plumbers. Quick, great rates, no messing around.
Salar RahbarGoogle review
★★★★★
Very good staff and very good pricing. Definitely recommend.
Salar EliteGoogle review
★★★★★
Very well priced and very good customer service like always.
Adam SmajdorGoogle review
★★★★★
Great price, friendly staff.

Rated 5 stars on Google · see all our reviews

FAQs

Aluminium Scrap Price FAQs

What is the aluminium scrap price per kg?

Clean aluminium extrusion is around A$2.50–3.50 per kg at our yard on the 3 November 2026 guide, and domestic aluminium around A$1.50–2.50 per kg. Cast aluminium and cans are priced when we see them. Your exact rate is confirmed after sorting and weighing.

How much is aluminium per kilo in Adelaide today?

The guide ranges are a starting point; aluminium follows the London Metal Exchange and the Australian dollar, so the rate on the day can shift. Call 08 7225 9998 before you bring in a big load and we will give you the current figure for your grade.

Which aluminium pays the most?

Clean extrusion pays the most: window and door frames, profiles and shopfront sections with the glass, rubber and steel taken out. Painted sheet, cast parts and anything with attachments pay less, because they melt down into lower-value alloys or carry material that has to be removed.

Do I need to remove glass from aluminium window frames?

Yes. Glass has to come out before frames can be accepted. Rubber seals and screws lower the grade, so remove what you safely can, but frames with a little rubber left in are still taken at the appropriate rate.

How can I tell aluminium from steel or stainless?

Aluminium is light and a magnet will not stick to it. Ordinary steel is heavier and magnetic. Some stainless steel is non-magnetic as well, but it is roughly three times as heavy as aluminium for the same size, which gives it away.

Do you buy aluminium cans?

Yes, as long as they are empty, dry and free of rubbish. Cans are very light, so a single bag is worth little on its own; they make the most sense brought in alongside frames, sheet or other scrap.

Where do I sell aluminium scrap in Adelaide?

At our Green Fields yard, 12 Belfree Dr, open Monday to Friday 7:30am to 5:00pm and Saturday 7:30am to 2:00pm. No booking is needed. Bring photo ID, and the aluminium is graded with you and paid before you leave.

Same load, other metals

Metals That Often Come With Aluminium

Aluminium jobs rarely produce aluminium alone. Check the alloy wheel scrap price for rims, radiator scrap prices for aluminium and copper-aluminium radiators, and the stainless steel scrap price for heavy non-magnetic pieces you set aside while sorting.

Get Today’s Aluminium Rate

Ring for the current rate on your grade, or bring your aluminium to 12 Belfree Dr, Green Fields SA 5107 to have it sorted, weighed and paid for in one visit.

SA COPPER SCRAPS

Get your free quote

Tell us what you’re selling and we’ll get back to you. Fields marked * are required.

    See our Privacy Policy and Terms.