Steel price guide reviewed 3 November 2026

Scrap Steel Price Adelaide – Heavy Steel, Light Sheet and Cast Iron

Scrap steel pays around A$0.10–0.25/kg (A$100–250 a tonne) at our Green Fields yard on the guide reviewed 3 November 2026. Clean heavy steel sits at the top of that range and thin sheet at the bottom; cast iron and mixed ferrous are priced on inspection. Weighed at 12 Belfree Dr, paid the same visit.

  • Heavy and light weighed apart
  • Paid the same visit
  • Photo ID required
  • Ring ahead for bulk
Steel price per kg and tonne

Scrap Steel Prices in Adelaide by Type

Steel is the lowest-paying metal per kilo, so it is quoted per kilo here and per tonne for big loads. Which end of the range you get depends mostly on whether the steel is heavy or light, and how much else is attached to it.

Reviewed 3 November 2026 Green Fields, Adelaide Final rate set at the weighbridge
TypeWhat it isGuide rate
Heavy steelBeams, plate, columns, thick bar and heavy machinery partsTop of A$0.10–0.25/kg
Light steel and sheetRoofing, fencing, shelving, thin offcuts and appliance panelsLower end of A$0.10–0.25/kg
Brake discs, drums and cast iron scrap in an SA Copper Scraps binCast ironBrake discs and drums, drained engine blocks, old pipe and machinery castingsPriced on inspection
Mixed ferrousSteel carrying timber, plastic, rubber or other metalsLowest until sorted
Worth knowing: a magnet test before you load up pays off. Copper, brass or aluminium hidden in a steel pile is weighed at the steel rate. Rates for those metals are on our full Adelaide scrap metal price list.
Assessment

How Scrap Steel Is Graded and Priced

Steelworks and exporters buy ferrous scrap by grade, and each grade melts with a different yield. These are the checks that decide where your load lands.

Thickness

Heavy steel melts down with very little loss, so it earns more per tonne. Thin sheet and roofing oxidise and burn off in the furnace, which is why light steel pays less.

Size

Pieces that fit our handling equipment are simplest. Very long beams or bulky machinery may need cutting down; ring first so we can tell you what fits.

Attachments

Concrete on reo, timber on frames, rubber on rims and plastic in appliances are not steel, and a load carrying them is graded as mixed until they come off.

Fluids

Engines, gearboxes, diffs and hydraulic parts must be drained of oil and fuel before they come in, for safety and so we aren’t paying for fluid weight.

Rust

Surface rust is normal and fine. Heavily corroded, flaking light steel carries less recoverable iron and sits at the bottom of the range.

The market

Steel scrap follows global iron ore and steel demand, so it moves more slowly than copper but can shift month to month. We review the guide at least monthly.

Our guide to how scrap steel is graded and paid goes further into ferrous grades and the steel market.

What we take

Steel We Accept and What We Can’t Take

Builders, fabricators, fencing contractors, farmers, mechanics and households all bring steel to us, from a ute load of shed scrap to trailer loads of offcuts.

We accept

  • Structural offcuts, beams, plate and bar from fabrication jobs
  • Roofing iron, fencing, mesh and old shed sheeting
  • Brake discs, drums, steel rims and suspension parts
  • Old farm implements and machinery, drained
  • BBQs, outdoor furniture and shelving from clean-outs
  • Drained engine blocks and cast iron castings

We can’t take

  • Gas cylinders, fire extinguishers and sealed drums
  • Fuel tanks or engines still holding fuel or oil
  • Steel coated in asbestos or with fibro attached
  • Loads that are mostly concrete, timber or general rubbish
  • Any load without current photo ID
Preparation

How to Prepare a Steel Load

Split the heavy steel from the light. Beams, plate and thick offcuts go on one side, roofing, sheet and fencing on the other, so the heavy steel is paid at its own rate instead of being averaged down.

Run a magnet over the pile and pull out anything it doesn’t stick to: copper pipe, brass fittings, aluminium and stainless are worth many times more than steel. Drain engines and gearboxes, knock off what concrete and timber you safely can, and ring ahead for anything over about a tonne. Our guide on sorting scrap before selling walks through a mixed load.

Quick checklist

  • Heavy and light steel loaded separately
  • Non-ferrous metals pulled out with a magnet
  • Engines, gearboxes and tanks drained
  • Concrete, timber and rubber off where practical
  • Call first for loads over about a tonne
Worked example

What Is a Trailer of Scrap Steel Worth?

Steel adds up by weight, not by piece. A typical single-axle trailer of mixed shed steel weighs a few hundred kilos, which is why sorting out the copper and brass often matters more than the steel itself.

ExampleWeightGuide rateGuide value
Heavy fabrication offcuts500 kgA$0.10–0.25/kgA$50–125
Copper pipe pulled out of the same pile5 kgA$17–21/kgA$85–105
The lesson: five kilos of copper can be worth as much as half a tonne of steel, so check the copper scrap price before it disappears into a steel load. Figures use the guide ranges; your rate is set at the yard.
At the yard

Selling Scrap Steel at Green Fields

Bring steel to SA Copper Scraps at 12 Belfree Dr, Green Fields SA 5107, just off Salisbury Highway and Port Wakefield Road. It is an easy run for builders and fabricators across the northern and western suburbs.

1

Ring for big loads

Anything over about a tonne, or very long or heavy pieces: call 08 7225 9998 so we can confirm the rate and where to unload.

2

Photo ID

We record current photo ID for every sale, as South Australian scrap metal rules require.

3

Weighed by grade

Heavy, light, cast iron and any non-ferrous metal are weighed separately on certified scales.

4

Paid the same visit

We confirm each grade’s rate and pay you before you leave.

Regular trade loads are welcome. See how we work with builders and demolition crews and manufacturers and fabricators, or get a price before you drive.
Customer reviews

What Steel Sellers Say About Us

Google reviews from people who bring steel and other scrap to our Green Fields yard.

Salar EliteGoogle review
★★★★★
Very well priced and very good customer service like always.
Adam SmajdorGoogle review
★★★★★
Great price, friendly staff.
Asadollah BaratGoogle review
★★★★★
Good service and excellent price. Keep going guys.
Samuel MorenaGoogle review
★★★★★
Friendly staff, easy access, great pieces.
Stanley VareliasGoogle review
★★★★★
Great staff and very welcoming, and best prices in the market.
sam haggertyGoogle review
★★★★★
Perfect for plumbers. Quick, great rates, no messing around.
Salar RahbarGoogle review
★★★★★
Very good staff and very good pricing. Definitely recommend.

Rated 5 stars on Google · see all our reviews

FAQs

Scrap Steel Price FAQs

What is the scrap steel price in Adelaide?

Around A$0.10–0.25 per kg, or A$100–250 a tonne, at our Green Fields yard on the guide reviewed 3 November 2026. Clean heavy steel earns the top of the range and thin sheet the bottom. Cast iron and mixed loads are priced when we see them.

What is the steel scrap price per kg?

Our guide range is A$0.10–0.25 per kg. Because steel is so cheap per kilo, large loads are usually talked about per tonne instead, so the same range is A$100–250 a tonne. Ring 08 7225 9998 for today’s figure on a big load.

What is the difference between heavy and light steel?

Heavy steel is thick and dense, such as beams, plate and heavy machinery parts, and melts down with little loss. Light steel is thin, such as roofing, sheet and appliance panels, and loses more in the furnace. That is why heavy steel is paid more per tonne.

How much is scrap iron worth?

Cast iron, such as brake discs, drums and drained engine blocks, is priced on inspection because its value depends on how clean it is and what is attached. Bring it separately so it is weighed and priced on its own rather than averaged in with sheet steel.

Is scrap steel worth taking to a scrap yard?

Yes for any decent load, and always if it is hiding copper, brass or aluminium. Steel is low value per kilo, so a few hundred kilos adds up to tens of dollars, but a handful of copper pulled out of the same pile can double what the trip is worth.

Do you take car bodies or whole vehicles?

No. We don’t buy cars or car bodies. We do buy steel and cast iron car parts such as brake discs, drums, steel rims and suspension parts, along with batteries and catalytic converters.

Where can I sell scrap steel near me?

In Adelaide, at our yard at 12 Belfree Dr, Green Fields, a short drive from Salisbury, Mawson Lakes and Port Adelaide. No booking is needed for normal loads; bring photo ID and you are paid before you leave.

Same load, other metals

Metals Worth Pulling Out of a Steel Load

Steel loads often hide better-paying metals. Check the stainless steel scrap price for sinks, benches and 304 or 316 offcuts, the aluminium scrap price for frames and sheet, and the electric motor scrap price for motors pulled from old machinery.

Get Today’s Steel Rate

Ring for the current rate on heavy or light steel, or bring your load to 12 Belfree Dr, Green Fields SA 5107 to have it weighed by grade and paid the same visit.

SA COPPER SCRAPS

Get your free quote

Tell us what you’re selling and we’ll get back to you. Fields marked * are required.

    See our Privacy Policy and Terms.